Argox PT-10 Uživatelský manuál Strana 32

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 89
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 31
User’s Manual 26
Entering Suspend Mode:
The following puts the PT-9X30 in suspend mode:
Press key while the unit is on.
The duration timer for Switch state to Suspend expires, which indicates that there
has been no use for a specified of time.
The battery pack discharges completely.
Tap Start Suspend
Figure 3-13 Suspend Mode
3.6.4 Resume
Press key to suspend or resume (wake up)
Waking the PT-9X30
The default wakeup conditions define what actions wakeup the PT-9X30. These setting are
configurable and the factory default settings are subject to change / update.
Status
Description
Condition for Wakeup
Power Off
When the PT-9X30 is set to suspend mode by
pressing , this action wakes the PT-9X30.
Press button
Auto Off
When the PT-9X30 enters suspend mode by
automatic power-off, this action wakes the PT-
9X30.
Press button
3.7 Resetting the PT-9X30
If the PT-9X30 stops responding to the system, you may need to rest it. There are three ways
to reset - warm boot, cold boot and clean boot.
A warm boot and cold boot restart the PT-9X30, but all data that have not saved will get lost.
All data in flash will be preserved.
A clean boot will erase all data except User application folder. In addition it returns formats,
preferences and other settings to the factory default setting.
Tap here to set the PT-9X30 into suspend
mode
Zobrazit stránku 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 88 89

Komentáře k této Příručce

Žádné komentáře